Buy Huawei SUN2000-15K-MB0 Inverter
The Huawei SUN2000-15K-MB0 inverter features two independent MPP trackers and offers a total of four inputs. The maximum input current per MPPT is 30A, with a short-circuit current of 40A. During operation, it produces only a pleasantly quiet operating noise. You can buy the inverter with practical battery connections, as it already comes equipped with two battery terminals.
Integration with the LUNA Smart ESS battery enables unified service through a single point of contact. The inverter comes with a 10-year warranty, extendable to 20 years. The system uses Smart Cooling technology for efficient cooling.
Additional safety is provided by AI-supported arc fault detection (AFCI), combined with UI curve diagnosis and DC individual current measurement. The integrated PID recovery function prevents potential-induced degradation, while the integrated AC/DC surge protection Type II protects the system from damage.
The direct meter connection via RS485 enables 24-hour energy monitoring. Digital inputs for ripple control receivers are available for integration into energy management systems. At only 21 kg, the inverter is comparatively lightweight.
Installation is simplified by the patented AC connector and the possibility of commissioning via app. The free FusionSolar monitoring portal (available as an app and web version) allows you to monitor the system. Modbus TCP and RTU are available for communication with other systems.
Huawei is a globally operating company that, in addition to telecommunications technology, also offers comprehensive solutions for the photovoltaic industry. With its extensive experience in the electronics sector, Huawei has established itself as a reliable provider of solar accessories. The Huawei SUN2000-15K-MB0 inverter represents the company's technical expertise in the field of solar energy.
Huawei SUN2000-15K-MB0 Inverter Data Sheet & Information
The Huawei SUN2000-15K-MB0 stands out with the following technical specifications: With an AC rated power of 15,000 watts and a maximum AC apparent power of 16,500 VA, it is suitable for medium-sized photovoltaic systems. The inverter operates with a maximum efficiency of 98.4% and a Euro efficiency of 98%.
This three-phase, transformerless inverter is particularly suitable for commercial and larger residential systems. It offers a maximum DC voltage of 1100 V, with a normal operating range between 200 V and 1000 V. The maximum input current is 30 A per MPPT.
Regarding mechanical properties, the Huawei SUN2000-15K-MB0 inverter measures 546 mm x 460 mm x 228 mm (L x W x H) and weighs 21 kg. Each MPPT tracker provides 2 DC inputs, to which you can connect MC4 type connectors.
The inverter features an electronic DC load disconnect switch. The housing color is gray, and with an IP66 protection rating, it is well protected against dust and water jets.
Grid monitoring is ensured by an integrated ENS (MSD). Connections include RS485 and WLAN as standard, with Ethernet (LAN) optionally available. An all-current sensitive residual current circuit breaker provides additional safety, as does the electronically controlled surge protection on the DC side.
The manufacturer provides a product warranty of 10 years. The device is certified according to numerous standards, including CE, CEI 0-21, IEC 61727, VDE-AR-N 4105:2018-11, and VDE-AR-N 4110:2018-11. These certifications ensure that the inverter complies with current European standards and safety regulations.
The active cooling provided by the integrated fan ensures optimal operating temperature and contributes to the device's longevity. The Huawei SUN2000-15K-MB0 also supports the installation of optimizers, which can increase energy yield by up to 30%.
Downloads
